DS 3: Instruments / Lighting dimmer
DS 3 2016-2024 Owners Manual
This system allows the brightness of the
instruments and controls to be adjusted manually
to suit the ambient light level.
With BLUETOOTH touch screen audio system
- Press on the Settings
menu.
- Select "Display".
- Adjust the brightness by
pressing the buttons.
You can also switch off the screen:
- Select "Turn off screen".
The screen goes off completely.
- Press the screen again (anywhere on its
surface) to activate it.
With DS CONNECT RADIO
- Press this button to select
the Settings
menu.
- Select "Brightness".
- Adjust the brightness by
pressing the
arrows or moving the slider.
The settings are applied immediately.
- Press outside the settings window to exit.
You can also switch off the screen:
- Press this button to select
the Settings
menu.
- Select "Dark".
The screen goes off completely.
- Press the screen again (anywhere on its
surface) to turn it on.
With DS CONNECT NAV
- Press this button to select
the Settings
menu.
- Select "OPTIONS".
- Select "Screen configuration".
- Select the "Brightness" tab.
- Adjust the brightness by
pressing the
arrows or moving the slider.
- Press this button to save
and exit.
You can also switch off the screen:
- Press this button to select
the Settings
menu.
- Select "Turn off screen".
The screen goes off completely.
- Press the screen again (anywhere on its
surface) to turn it on.
Manual test
This function allows you to check certain
indicators and display the alerts log.
It can be accessed via the "Check"
button
in the Driving/Vehicle touch screen menu...
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
Data displayed on the instrument panel
Display of the various tabs
Pressing the button located on the end of the
wiper control stalk displays the following tabs in
turn:
Current information:
Driving range (Petrol or Diesel)...
Other information:
For more information,
refer to the General
recommendations for automatic lighting
systems.
Available only on versions equipped with Full LED
headlamps with Matrix Beam function.
This system automatically adapts the main
beam according to the driving conditions, so that
optimum illumination is maintained for the driver,
without causing a nuisance to other road users...
To access the rear screw thread:
Unclip the cover by pressing at its left-hand
section.
Pull the cover downwards.
To tow:
Screw the towing eye in fully.
Install the towbar.
Switch on the hazard warning lamps on both
vehicles.
Move off gently, drive slowly and only for a
short distance...