DS 3: Adaptive Cruise Control / Messages and alerts

To benefit from the following information on the instrument panel, select the DRIVING or Driving aids display mode.

The display of these messages or alerts is not sequential.

"Cruise paused" or "Cruise control on hold" following brief acceleration by the driver.

"Active cruise control", no vehicle detected.

"Cruise paused", vehicle detected.

"Active cruise control", vehicle detected.

"Take back control" (orange).

• Brake or accelerate, depending on the context.

"Take back control" (red).

• Take back control of the vehicle immediately:

the system cannot manage the current driving situation.

"Activation refused, conditions unsuitable". The system refuses to activate cruise control, as the necessary conditions are not fulfilled.

Stop & Go function

"To pick up again: accelerate or press the II button" (button 4).

The system has brought the vehicle to a complete stop.

Within 3 seconds, the vehicle gradually and automatically begins moving again.

After 3 seconds, the driver must accelerate or press button 4 to move off again.

While the vehicle is immobilised, the following recommendations apply:

• The driver should not leave the vehicle.
• Do not open the boot.
• Do not drop off or pick up passengers.
• Do not engage reverse gear.

When moving off again, watch out for cyclists, pedestrians and animals, as they may not be detected properly.